Home › Drywall Installation

✦ MIAMI-DADE DRYWALL SPECIALISTS

Drywall Installation in Miami, FL

New walls, new ceilings, remodels and full commercial build-outs. Magic City Drywall provides drywall installation in Miami for homes, condos and businesses, from framing check to a smooth, paint-ready finish.

We hang, tape and finish every board ourselves, so one crew is responsible for how your walls look when the job is done.

Call [PHONE] Request an Installation Estimate

★ 5.0 — from customer reviews

Get your free estimate

Takes about 30 seconds.

[Response time: CONFIRM.]

Drywall Installation Services in Miami

Home Drywall Installation in Miami, FL

Kitchen and bathroom remodels, room additions, garage conversions, closets, new room divisions and whole-home renovations. In a lived-in home, we protect floors and furniture, contain dust and keep the work area organized so your household can keep running. [CONFIRM: dust control and cleanup practices.]

New Construction Drywall

Single-family homes, townhouses and additions on open framing. New construction is usually the most efficient type of installation, because the walls are open and easy to reach.

Commercial Projects

Offices, retail stores, restaurants, medical suites and multifamily buildings. Commercial installation usually means metal stud framing, fire-rated walls and ceilings built to the specified design, and a schedule coordinated with other trades. Commercial Drywall page

Ceiling Drywall Installation

New ceilings, ceiling replacements after water damage, soffits and bulkheads. Ceiling board is heavier to handle and less forgiving under light, so layout and fastening matter even more than on walls.

Taping and Finishing

Every installation includes taping, mudding and sanding to the finish level your room needs. For finish levels, skim coating and fixing visible seams, see our page on drywall finishing in Miami. Drywall Finishing page

Sheetrock Installation

Sheetrock is a brand name of drywall. Drywall is the general industry term. Sheetrock installation and drywall installation are the same service, whatever brand of board your project uses.

Framing and Insulation Before the Board Goes Up

The quality of a drywall installation starts with the framing behind it. We also install metal framing and insulation, so the wall is built correctly from the inside out. Metal Framing Miami page Insulation Installation Miami page

What Is Included in Drywall Installation?

This is the most common source of confusion when comparing quotes. Some drywall contractors only hang the drywall. Others also tape, mud and sand it to create a smooth surface. Two quotes can look very different simply because they cover different work.

Stage	What it means	Included in our installation?
Hanging	Measuring, cutting and fastening board to the framing	Yes
Taping	Embedding tape over joints and inside corners	Yes
Mudding and finishing	Several coats of joint compound, each left to dry	Yes
Sanding	Smoothing between and after coats	Yes
Corner bead	Metal or vinyl edges on outside corners	Yes
Texture	Orange peel, knockdown or smooth	If selected
Primer and paint	Sealing the drywall and painting	If selected Interior Painting Miami page

[CONFIRM: adjust this table to the client’s real standard scope.]

When you compare quotes, make sure each one names the board type, the finish level and whether texture and paint are included.

Choosing the Right Drywall for Each Room

Standard residential drywall is 1/2 inch thick, but different rooms need different boards. In Miami, moisture is the main concern.

Board type	Where it goes	Why
Standard 1/2-inch drywall	Most interior walls and ceilings in homes	The usual residential board
5/8-inch Type X (fire-resistant)	Garage ceilings below living space, fire-rated walls and ceilings	Required in fire-rated assemblies and where the code calls for it
Moisture- and mold-resistant board	Bathrooms, laundry rooms, behind sinks and kitchen backsplashes	Resists moisture, but is not waterproof
Sound-reducing drywall	Bedrooms, home offices, media rooms, shared condo walls	Helps cut noise transfer between rooms
Tile backer board	Shower and tub surrounds	Standard drywall is not a substitute where walls get wet directly

How We Install Drywall the Right Way

Good drywall work is mostly invisible. Poor work shows up later as cracks, bulging seams and fastener pops. These are the details that make the difference.

We check the framing first. Studs and joists should be straight and evenly spaced, usually 16 or 24 inches on center. Problems in the framing show through the drywall, so we fix them before the board goes up.

We plan the layout to reduce seams. Drywall manufacturer CertainTeed notes that hanging walls horizontally reduces the length of seams by about 25 percent, and that horizontal seams are easier to finish evenly. On commercial jobs, walls are typically hung vertically. On ceilings, boards normally run across the joists rather than along them.

We stagger the joints. End joints are offset from one sheet to the next, so seams do not line up into one long weak line.

We use screws, set correctly. Screws are driven just below the surface without tearing the paper and kept a safe distance from the edges of the board.

We follow industry standards. Installation follows the Gypsum Association’s GA-216 standard for application and finishing of gypsum panels, and finishing is done to the GA-214 level agreed in your estimate.

Drywall Finishing in Miami’s Humidity

Joint compound dries by releasing water into the air, so Miami’s humidity slows it down. The Gypsum Association notes that in poor drying conditions, a single coat can take more than three days to dry. Coating over damp compound causes cracks and seams that show through the paint, so we run the air conditioning where possible and never apply the next coat until the last one is fully dry. This is also why a realistic drywall schedule in Miami may be longer than one you see online. Drywall Finishing page, “Finishing in Miami’s Humidity” section

Drywall Finish Levels

The finish level decides how smooth the wall looks once painted. Level 4 is the standard for most homes and offices with flat paint. Level 5 adds a skim coat over the entire surface and suits smooth walls, glossy or dark paint and rooms with strong side light from large windows. Your installation estimate names the level. Drywall Finishing page, “Level 4 or Level 5: Which Do You Need?” section

Commercial Drywall Installation: Fire-Rated Assemblies

In commercial buildings, a fire rating belongs to the whole tested assembly, not to the drywall alone. The studs, board type, number of layers, fasteners and joint treatment must all match the tested design shown on the plans, often a UL design. As National Gypsum explains, the contractor must build a UL fire-rated design using the products approved and tested for that assembly. For framing, shaft walls, sound-rated walls and how we bid commercial work, see our Commercial Drywall Services page. Commercial Drywall page

How Much Does Drywall Installation Cost in Miami?

Every installation is priced from your plans or a site visit. These published figures give you a useful starting point and were current at the time of writing.

Project	Reported cost	Source
Drywall installation in Miami (average project)	About $1,752, with most projects between $932 and $2,768	HomeAdvisor, Miami data
full reported range	$350 to $5,800	HomeAdvisor, Miami data
Hiring a drywall installation pro (national range)	$375 to $1,500	Thumbtack
One or two standard-size rooms	$900 to $1,500	Thumbtack example

Installation in new construction with open access usually costs less than installation during a remodel.

[OPTIONAL: Add your own real prices, for example per square foot or per standard room.]

What changes the price:

Total square footage of walls and ceilings
Ceiling height and access
Board type, such as Type X, moisture-resistant or sound-reducing
Finish level and texture
New construction versus remodeling in an occupied home or condo
Demolition and removal of old drywall
Framing or insulation work needed first
Primer and paint
Permits and inspections

Do You Need a Permit for Drywall Installation in Miami?

Under the Florida Building Code, a permit is generally required for drywall installation. This includes new walls, additions and remodels, though the rules differ by city and the type of work. The permit must be pulled by a contractor licensed by Miami-Dade County or the State of Florida in an eligible category. We confirm the requirements for your address before work begins. Drywall Repair Miami page, permit section

[CONFIRM: who pulls permits on your jobs.]

Our Drywall Installation Process

Consultation — We discuss the project, the boards and finishes you want and your timeline.
Site visit and measurements — We measure walls and ceilings, check the framing and note access and protection needs.
Written estimate — You receive a written estimate naming the board type, finish level, texture and paint.
Permits, where required — We confirm whether a permit is needed and who pulls it.
Delivery and preparation — Board and materials are delivered, and floors and nearby surfaces are protected.
Hanging — The board is measured, cut and fastened to the framing.
Taping and finishing — Joints are taped and finished to the agreed level.
Sanding and texture — Surfaces are sanded smooth and texture is applied if selected.
Primer and paint, if included — Walls are primed and painted where the estimate includes painting.
Final walkthrough — We walk through the finished work with you and check it under normal light.

How long does it take? Hanging a single room usually takes a day or two. Finishing adds several more days because each coat of joint compound must dry before the next is applied. Your written estimate includes a realistic schedule for the work.

Hang-Only Crew, Handyman or Full-Service Drywall Contractor?

It depends on what the job needs. For small patches, a handyman may be enough. For a remodel or a room where the finish matters, a full-service drywall contractor is usually the better fit.

Your project	Best fit
Patching one or two small areas	Handyman
Your general contractor needs board hung only	Hang-only crew
A remodel, addition or whole room where the finish matters	Full-service drywall contractor
Smooth Level 5 walls or rooms with strong light	Full-service drywall contractor
Commercial build-out with fire-rated walls	Drywall contractor experienced with rated assemblies

Drywall Installation Across Miami-Dade

We handle Miami drywall installation projects throughout [CONFIRM SERVICE AREA, for example: Brickell, Downtown Miami, Coral Gables, Coconut Grove, Little Havana, Wynwood, Miami Beach, Doral, Hialeah, Kendall, Miami Gardens and North Miami].

Why Choose Magic City Drywall for Drywall Installation in Miami

Full service — One crew handles framing checks, hanging, taping, finishing, texture and paint, so no work is left half-finished.
Finished for Miami’s climate — We use moisture-resistant board where it is needed and allow full drying time between coats.
Clear scope — Your written estimate names the board, finish level, texture and paint before work starts.
Commercial-ready — We build to tested fire-rated and sound-rated designs on commercial projects.
Respect for your home — Floors and nearby surfaces are protected, dust is controlled and debris is removed.

[CONFIRM: Warranty terms, license details and years in business.]

What Our Customers Say

They framed and boarded our new addition with a Level 5 finish, and the paint went on without a single seam showing.
Kevin M.
Doral · New addition installation
They measured, hung and finished our basement walls so straight the trim fit perfectly.
Tom H.
Hialeah · Basement installation

[PROJECT PHOTOS: Real installation jobs, for example framing, hung board and finished room.]

Drywall Installation FAQs

Published figures give a useful starting point. HomeAdvisor reports an average project cost of about $1,752 for drywall installation in Miami, with most projects between $932 and $2,768. Thumbtack gives $900 to $1,500 for one or two standard-size rooms. Your final price depends on the square footage, board type, finish level, texture and whether the work is new construction or a remodel.

Hanging is usually the quick part. Finishing takes longer because each coat of joint compound must dry before the next is applied, and Miami’s humidity slows drying. Your written estimate includes a realistic schedule for the work.

On residential walls, horizontal hanging is preferred. Drywall manufacturer CertainTeed notes that it reduces seam length by about 25 percent and that horizontal seams are easier to finish evenly. Commercial walls are typically hung vertically. Ceiling boards normally run across the joists.

Use moisture- and mold-resistant board for bathroom walls outside the shower. Inside shower and tub surrounds, use tile backer board. Standard drywall is not a substitute where walls get wet directly.

Not always. Some crews hang board only and leave finishing to someone else. Our installation includes hanging, taping, finishing and sanding. Texture and paint are included if you choose them.

Usually, yes, for new walls, additions and remodels, though the rules vary by city. We confirm the requirements for your address before starting.

Drywall is the general term for gypsum wallboard. Sheetrock is a brand of drywall.

Yes. We build fire-rated assemblies to the tested design shown on the approved plans, using the board, layers and fasteners that design calls for.

Yes. We can install insulation before the board goes up, so walls are insulated before they are closed.

Yes. If your estimate includes painting, we prime and paint the finished drywall.

Get a Drywall Installation Estimate

Share your plans, photos or a few details about the space. We will review the project, recommend the right boards and finish level, and send a written estimate.